It can be used for the production of flake materials such as caust..."/>
Nickel Drum
Nickel Drum

         It can be used for the production of flake materials such as caustic soda, potassium alkali, sulfur and phthalic anhydride. The materials of drums can be nickel, stainless steel and heat resistant steel.

        The nickel plate used in the production of flaker nickel drum is Ni6 wide plate, which meets the  standard of GB/T 2054-2005, M state. The thickness of the plate depends on the size of machine type. The width of the plate is not less than the height of the drum, and the length of the plate is not less than the circumference of the drum. Except for the two ends of the drum, there is only one weld in  the axial direction. The weld is inspected by 100% X-ray according to standard of JB4730-2005 . It is qualified at RT-II level or above, and 0.1 MPa pressure test is carried out to ensure no leakage. The surface is polished to improve the surface hardness and roughness of the drum, as well as the wear resistance and service life of the drum.


  • Product Parameters

Recommend